Majortel Power Systems meet or exceed most equipment application requirements for today’s growing new technology networks. The utility systems include telecom grade switch-mode 125V rectifiers or 130V high-frequency isolated dc/dc converters in a feature rich mounting shelf with integrated remote communication package. Each shelf is 1.75” tall (1U), 11” deep and occupies a standard 19” wide rack space. Existing deployments are approved for substation auxiliary dc power systems.
The Majortel dc Power system, MTS130/20AT-1U, is designed with a maximum of 2800W @ 140V using two (2) power modules, communication module and integrated distribution circuit breaker. Configure the dc power supply output voltage using the front panel buttons, therefore, selecting electronically controlled operation from 100 to 150Vdc. This adjusting feature facilitates multiple application requirements from float charging batteries with 135V dc or powering static 125V to 130V dc power loads like switchgear circuit breaker controls.
Each system is designed to occupy a true 1U rack space in an EIA standard 19″ wide rack and under 11″ deep. Installations can include one or two compact, high density and reliable switch-mode rectifiers at 10 amps each for a total system capacity output configuration of 2800W (20A).
The integrated system includes a simple 2-pole output breaker configuration suitable for connections to an existing bus, individual load or substation battery charger. Selectable Software Operation Modes: Battery Charger or Load-Only*.
Ordering Assembly Numbers:
MTS130/10AT-1U – rack system with 19″ ears, controller and 1 rectifier (10A)
MTS130/20AT-1U – rack system with 19″ ears, controller and 2 rectifiers (20A)
temperature compensation probe included in the kits
(* default mode)
The Majortel dc/dc Converter system is a sleek, compact design that is ideal for applications requiring 48V dc power from a 125V-130V dc power source or substation ESS. Each MTD48/50-130-1U system is designed to occupy a true 1U (1.75” tall) rack space in a standard 19” wide rack and under 11”deep. Typical installations include two compact, high density and reliable high frequency 25 amp converters, for a total system capacity configuration of 2900W at 48V output.
The MTD48/50-130-1U converter system includes a simple Load 1 and Load 2 breaker distribution to support multiple isolated output circuit configurations and the MTS-Com centralized man-to-machine interface. The system power capacity is preconfigured for 50A applications. Each dc-dc converter module is hot-swap capable, facilitating field replacement in a matter of minutes. Install one or two modules with automatic load sharing based on physical presence in the system. #FaultTolerantPower
Ordering Assembly Numbers:
MTD48/25-130-1U – rack system with 19″ ears, controller and 1 converter power module (25A)
MTD48/50-130-1U – rack system with 19″ ears, controller and 2 converter power modules (50A)
»Full power; Wide Input Ranges
»Complete System Design
»Extended Temperature Operations; Up to 75ºC
»System Capacity range from 1440W to 2900W
»Easy, Manageable monitor screen
»Programmable alarms on dry-contacts
»Integrated Remote Communication Package
»N+1 Configuration Capabilities
»Quick Check LED indications
»Standard 19” wide rack and under 11” deep
»Built-in breaker distribution
»Infrastructure System Security
»Network Telemetry Back-Haul
»IT Private Networks
»Substation Battery Charger
»Dispatch Data Inter-connectivity
»Auxiliary Control & Instrumentation
»Substation Auxiliary DC Power