Smart Battery Chargers are designed for Marine Applications, Recreational Vehicles, and Industrial Applications. Their multi-stage charging capabilities are ideal for ripple-free performance and prolonged battery life.

Smart Battery Chargers are able to recharge multiple battery banks simultaneously, know when to stop charging to avoid cell damage, and provide exceptional charging performance when charging from inconsistent line voltage.

• Fully Automatic Operation
  • Charger can be left permanently attached to batteries for true "connect and forget" operation. TrueCharge monitors charging voltage, current, and time, to make a truly smart decision about when to stop charging.
• Variable Battery Type Settings
  • Adjust charger output for the different charging requirements of sealed (gel) lead-acid and conventional flooded (wet) batteries.
• Charge Mode Selection Switch
  • Select 3-step (bulk/absorption/float)
  or 2-step (bulk/absorption/off) depending on battery manufacturer recommendation. Select 13.5 volt fixed to use as a pure DC power supply.
• Battery Status LED indicators
  • Display stage of charge and battery ready status.
• Temperature Compensation
  • Adjust charging voltage to compensate for battery temperature, providing an accurate charge in any climate.
• Three-Bank Battery Charging
  • Three separate DC positive terminals.

• Wide Input Voltage Range
  • Charge output and accuracy not affected by 'drooping' shore power voltages as low as 90VAC.
• Compact Size and Weight
  • Designed for easy installation.
• Available Options
  • Remote display panel
  • Remote temperature sensor.
• Compact Size and Weight
  • Designed for easy installation.
• Available Options
  • Remote display panel
  • Remote temperature sensor.
• Overload protection, Over-temperature shutdown, Ignition protection.
• Non-sparking feature for safe battery connection.
• Reverse polarity and short-circuit protection.
• Transformer isolated to protect against electrolysis.
• CSA approved to CSA & UL standards for Marine, RV, and Industrial use.

TrueCharge10TB is a 10-amp multi-stage battery charger with an enclosed terminal block.

Designed to be hard wired into your electrical system, the TrueCharge10TB is ideal for batteries from 25 amp-hours to 200 amp-hours. The multi-stage charge is microprocessor-controlled, ripple-free and faster charging than many 15, 20, and 30 amp rated ferroresonant battery chargers.

The accurate delivery of the three-stage charge eliminates the risk of overcharged or boiled batteries. The ripple-free, filtered DC output helps prolong the life of batteries.

TrueCharge10 Micro-processor controlled, 10 amp continuous duty, multi-stage battery charger.

The TrueCharge10 is designed for batteries from 25 amp-hours to 200 amp-hours. Using alligator clip leads for battery connection, this portable charger offers quicker charging times than many 15, 20, and 30 amp rated ferroresonant battery chargers due to multi-stage charging capability.

The TrueCharge10 gives ripple-free charging performance when charging from inconsistent line voltage as typically seen from dock power or generators. Ultimately, this saves wear and tear on your batteries and greatly extends their lifetime.

TrueCharge20+ Micro-processor controlled, 20 amp continuous duty, multistage battery charger.

Ideal for deep-cycle marine, RV, and industrial batteries, the TrueCharge20+ is designed for batteries from 100 amp-hours to 400 amp-hours. It offers three-bank battery charging capability with one charger.

Microprocessor controlled, it provides fully automatic battery charging for faster charging times than many 40 and 50 amp rated ferroresonant battery chargers. This is made possible via the four-stage charging capability of the TrueCharge20+.

Domestic & International

TrueCharge40+ Micro-processor controlled, 40 amp continuous duty, multistage battery charger.

Ideal for deep-cycle marine, RV, and industrial batteries, the TrueCharge40+ is designed for batteries from 200 amp-hours and up. It offers three-bank battery charging capability with one charger.

Microprocessor controlled, it provides fully automatic battery charging for faster charging times than many 75 and 80 amp rated ferroresonant battery chargers. This is made possible via the four-stage charging capability of the TrueCharge40+.

Domestic & International