| Input |
| Voltage |
85-264 VAC, 47-63 Hz |
| Power Factor |
0.98 (typical) |
| Protection |
Thermal Fuse; Inrush current limiting |
| Isolation |
2250 VDC input to chassis; 4300 VDC input to output, 8 mm spacing;
500 VDC output to chassis |
| Output |
| Voltages |
24 VDC/60 Amps, 28 VDC/53 Amps, 48 VDC/30 Amps standard |
| Line/Load & Cross Regulation |
±1% combined; Tighter regulation available |
| Overvoltage Protection |
Double regulator loop |
| Overload Protection |
Rectangular current limiting with short circuit protection
Thermal shutdown with auto reset
|
| Efficiency |
Min 80% at full load |
| RFI Suppression |
Meets requirements for FCC Class B and EN 55022 Class A conducted emissions |
| Ripple/Noise |
Better than 1% of output voltage peak to peak or 0.2% RMS of output voltage (20 Hz BW) |
| Hold Up Time |
Minimum 10 ms at full load for 5% drop of output voltage |
| Mechanical |
| Operating Temperature |
0 to +50°C with convection cooling, Extended temperature range available |
| Temperature Drift |
0.03% per °C over operating temperature range |
| Dimensions |
5" x 5" x 11.5" enclosed case |
| Weight |
11 lbs |
| Connections |
Screw type terminal block. |
| Warranty
|
Twelve months subject to application within good engineering practice
|
| Approvals |
Full compliance to IEC950, CSA 22-2-950 and UL 1950 Please contact MajorPower.Com for approval status for the requested input/output configuration |