| ABC Series and RM Series Battery Chargers |
|
|
ABC Series Battery Chargers utilize the same time-tested charge circuitry as our RM chargers (see output curves below), but are housed in a rugged black anodized aluminum case. Large heat sinks dissipate heat without the use of fans or louvers, keeping introduction of atmosphere into the unit to a minimum.
The SCR circuitry of the charger independently senses and regulates two separate output banks, allowing the charger to be left on indefinitely without overcharging batteries, even under no-load conditions.
ABC chargers are ideal for batteries in both mobile and fixed installations; emergency vehicles, electric carts, material handling equipment, generator sets, communication sites and base stations.
|
|
 |
|
 |
|
 |
 |
- Total output ammeter
- Dual independently regulated output banks
- On-off switch and power "on" indicator light
- Vibration absorbing mounting grommets
- Anodized aluminum case
- 115/230 VAC input selector switch
- Auto-reset thermal breaker
- Conformal coating of circuit board for corrosion resistance
|
|
 |
ABC Battery Charger Specs |
| |
|
 |
| Model |
Input Ref. |
Input Amps @ F.L. |
Output Volts |
Output Banks |
Output Amps |
Case
Size |
Weight |
| ABC 12-8 |
105 - 125 VAC,
50 - 60 Hz |
1.5 / .75 |
12 |
2 |
8 |
8"H x 6"W x 4.2"D
(20.3 x 15.2 x 10.6 cm)
|
9 lbs (4.1 kg) |
| ABC 12-15 |
105 - 125 VAC,
50 - 60 Hz |
3 / 1.5 |
12 |
2 |
15 |
8.1"H x 4.7"W x 6.2"D
(20.6 x 11.9 x 15.8 cm)
|
12 lbs (5.5 kg) |
| ABC
12-25 |
105 - 125 VAC,
50 - 60 Hz |
5 / 2.5 |
12 |
2 |
25 |
10.2"H x 4.7"W x 6.2"D
(25.9 x 11.9 x 15.8 cm)
|
14 lbs (6.4 kg) |
|
|
|
RM Series Battery Chargers are well suited for commercial and recreational marine applications or maintaining communication system batteries at base stations and remote sites, and are rugged enough for installation in emergency vehicles.
|
|
 |
|
 |
|
|
|
- Fully automatic operation
- Charges multiple battery banks simultaneously
- Ammeter indicates total charging current
- Flow thru louver cooling
- Compact size for easy bulkhead mounting
- Automatic boost for quick starts
- Automatic reset thermal overload protection
- Reverse polarity protected
- Ignition protected per USCG Reg. 183.410
- Total AC isolation won't cause electrolysis
- 100% Stainless Steel Case with Drip Shield
- Designed to meet UL 1236 specifications
- Model RM 15-UL is Marine UL listed.
|
|
|
RM Battery Charger Specs |
| |
|
|
| Model |
Input Ref. |
Input Amps
@ F.L. |
Output Volts |
Output Banks |
Output Amps |
Dimensions |
Weight |
| RM 8 |
105-125/
210-250 VAC
50-60HZ
|
1.5 / .75 |
12 |
2 |
8 |
8.25"H x 7"W x 6.3"D
(2.1 x 17.8 x 16.0 cm) |
6 lbs
(2.7 kg) |
| RM
15-UL* |
105-125
VAC
50-60HZ
|
3 |
12 |
2 |
15 |
8.25"H x 7"W x 6.3"D
(2.1 x 17.8 x 16.0 cm) |
12 lbs
(5.5 kg) |
| RM
15 |
105-125/
210-250 VAC
50-60HZ
|
3 / 1.5 |
12 |
2 |
15 |
8.25"H x 7"W x 6.3"D
(2.1 x 17.8 x 16.0 cm) |
12 lbs
(5.5 kg) |
| RM
20 |
105-125/
210-250 VAC
50-60HZ
|
4
/ 2 |
12 |
2 |
20 |
8.25"H x 7"W x 6.3"D
(2.1 x 17.8 x 16.0 cm) |
14 lbs
(6.4 kg) |
| RM
24-8 |
105-125/
210-250 VAC
50-60HZ
|
3 / 1.5 |
24 |
2 |
8 |
8.25"H x 7"W x 6.3"D
(2.1 x 17.8 x 16.0 cm) |
12 lbs
(5.5 kg) |
* This model is Marine UL Listed
|
| Charger Characteristics |
| Type |
Rating |
Temp. Rating |
Float Voltage |
RM
|
Rated Charging
Output 20 min.
Derate to 70% for continuous duty
|
0-40° Celsius |
13.4 VDC - 12 Volt System
26.8 VDC - 24 Volt System
|
|
|
| Custom Applications- Contact MajorPower.Com |
| |
