| Power Classic
Battery Series |
|
| "CLASSIC" PRC and SL Series of valve regulated
lead acid (V.R.L.A.) batteries have been developed and refined
by POWER BATTERY since 1982. It has been the battery of choice
by many of the original equipment manufacturers throughout the world.
Our state of the art V.R.L.A. design utilizes an absorbed glass mat
(A.G.M.) separator technology to immobilize the battery electrolyte.
During the battery's charge cycle, the cell undergoes a series of
oxygen recombination reactions that virtually eliminates water loss.
There is never any need to add water to the cells and in fact all
vents are factory sealed. These batteries are the ideal choice for
U.P.S., Emergency Lighting, Switchgear and other standby applications
which need reliable, high rate power. Since these batteries are low-gassing
they require no special ventilation. Additionally, a compact design
makes them perfect for low maintenance and space restricted applications. |
|
 |
|
 |
|
- Ten-year design life.
- A recognized component of U.L.
- Valve regulated lead acid battery (VRLA).
- Absorbed glass mat technology (AGM) with gas recombination greater
than 99%.
- Operates at a low internal pressure.
- Never needs watering, minimal maintenance.
- 99.7% pure lead calcium grids.
- Shock absorbant thick wall polypropylene cases.
- *Flame retardant cases are optional
(TC and SLF models).
- TC and SLF models meet U.L. 94.V0 requirements, and have an oxygen
index greater than 28%.
- Cold forged non-porous terminal bushings, eliminate post leakage.
- Thermally welded cover to case bond, eliminates both acid and electrical
leaks.
- Over-sized, through the partition inter-cell welds provide low resistance
connections, with minimal power loss.
- Each cell has a low pressure safety release venting system, recognized
per U.L. 924.
- Measured high vacuum acid fill, reduces electrical variability between
cells.
- 100% recyclable materials.
- **No transport restrictions
- Surface transport. Classified as non-hazardous material as relates
to DOT-CFR Title 49 part 171-189.
- Water transport. Per IMDG amendment 27.
- Air transport. Complies with IATA / ICAO, special provision A67.
|
|
 |
| Operating Temperature Range |
| Discharge |
-40ºF (-40ºC) to +140ºF (60ºC) |
| Charge |
-4ºF (-20ºC) to +122ºF (50ºC) |
| Ideal Operating Temp Range |
+68ºF (20ºC) to +77ºF (25ºC) |
| Charging Voltage |
| Float operation |
2.25 to 2.30 V.P.C. |
| Cycling operation |
2.35 V.P.C. |
| Charge voltage temperature compensation factor |
Temperature correction factor for float voltage charge is to add 1.7mV/ºF (3mV/ºC) below 77ºF (25ºC) and subtract 1.7mV/ºF (3mV/ºC) above 77ºF (25ºC). This correction factor only applies to temperatures between 32ºF (0ºC) and 104ºF (40ºC) |
| Maximum charging currents |
| Partially discharged |
Self limiting |
| 80% to 100% discharge |
C/4 amperes |
| Storage time from a fully charged condition |
6 months at 77ºF (25ºC) (less at higher temperatures) |
|
|
 |
| "Classic" Series
- Traditional Design |
| Battery Model # |
Volts Nominal |
AH@20 hrs to 1.75VPC |
Dimensions
L x W x H** |
Weight |
| PRC-1225X TC-1225X |
12 |
24 |
6.5 x 6.81 x 4.94"
165 x 173 x 125mm |
21.5lbs (9.7kg) |
| PRC-1235X TC-1235X |
12 |
32 |
7.71 x 5.18 x 7.19"
196 x 132 x 183mm |
26.7lbs (12.1kg) |
| PRC-1250XL TC-1250XL |
12 |
50 |
8.61 x 5.29 x 8.79"
219 x 134 x 223mm |
35.3lbs (16kg) |
| PRC-1265 TC-1265 |
12 |
63 |
10.2 x 6.57 x 9.66"
259 x 167 x 245mm |
50.7lbs (23kg) |
| PRC-1290X TC-1290X |
12 |
76 |
10.2 x 6.57 x 9.66"
259 x 167 x 245mm |
60.6lbs (27.5kg) |
| PRC-12100X TC-12100X |
12 |
91 |
12 x 6.57 x 9.71"
305 x 167 x 247mm |
71.9lbs (32.7kg) |
| PRC-12120X TC-12120X |
12 |
110 |
13.54 x 6.76 x 9.78"
344 x 172 x 248mm |
81.8lbs (37.2kg) |
| PRC-12150X TC-12150X |
12 |
130 |
13.54 x 6.76 x 11.79"
344 x 172 x 299mm |
100.1lbs (45.5kg) |
| PRC-6200X TC-6200X |
6 |
208 |
10.71 x 7.38 x 11.6"
272 x 187 x 295mm |
77.2lbs (35.1kg) |
| PRC-6225X TC-6225X |
6 |
220 |
10.71 x 7.38 x 11.6"
272 x 187 x 295mm |
82.2lbs (37.4kg) |
|
|
| "Classic" Series
- Front Access Design |
| Battery Model # |
Volts Nominal |
AH@20 hrs to 1.75VPC |
Dimensions
L x W x H** |
Weight |
| SLF-12105 |
12 |
91 |
21 x 4.28 x 9.63"
534 x 109 x 245mm |
74lbs (33.6kg) |
| SLF-12205 |
12 |
184 |
20.8 x 8.7 x 10.1"
528 x 221 x 245mm |
152lbs (68.9kg) |
|
| |
* All batteries have "L" type lead
terminals except the SLF types which have a drop terminal with copper
insert.
** Height is to the top of the terminal. |
|
|
| Custom
Applications - Contact MajorPower.Com |
| |
|
